Load cells can be divided into two series
The TR series load cells are used to measure the tension of a stretched plastic film or tape that is often used for winding on a mechanical guide roller. It can be mounted on the fixed and transfer shafts on the mechanical chassis, and its function on the end shaft is a function of pressure sensitive components and loads. It can be used to fix and rotate both axes. The TR series sensors are available with fixed, 4M6 thread or center thread with M10 or M12 adapter flanges.
Main features: Measurement range from 100N to 2KN
Accuracy class: 0.5% Corrosion resistant, internally formed calibration signal, minimum sensitivity axis direction is 35 degrees from the fixed hole.
Protection level: IP65 forms overload protection
The TC series load cell is a tension measuring sensor, which is often used for static measurement and dynamic measurement, and has a compression form with good precision. Its mechanical part is composed of a single piece of metal, so this basic measuring element and its outer casing part have no welding process, which makes the size smaller and strengthens the protection level. This point measurement structure has 8 tension measurements to reduce errors due to imperfect applications of the load. Typical applications for parallel weighing elements are: storage bins, hoppers, and large weighing platforms. The stainless steel construction is suitable for applications in aggressive environments in the petrochemical and chemical industries.
Main features: Measurement range from 100 to 20.000Kg
Accuracy class: 0.2% All stainless steel construction, corrosion resistant, internally formed calibration signal
Protection level: IP67 (DIN40050)
