First, the transmission distance is long, the communication speed is fast, and the confidentiality is good.

The digital load cell signal output adopts digital quantity, which not only has high level, but also has little influence by interference. Moreover, it adopts field bus technology, the communication speed is super fast, and it also has communication error correction function. Due to the confidentiality of the communication protocol, Confidentiality is good.

Second, strong anti-interference ability, high reliability, good lightning protection performance

The digital sensor uses a new welding manufacturing technology, which is also filled with helium protection circuit and has a very high degree of protection. In order to prevent the interference of lightning surge, it uses the output voltage of the instrument to reprocess to meet the supply voltage requirement of the sensor, so that the output signal is stable and the sensor will not be damaged.

Third, exemption from calibration

Digital sensors can be calibrated in production using standard force measuring machines, and their outputs correspond to standard values. Since it has substantially no loss in the transmission engineering, the value read is the actual measurement value, which greatly saves time.

Fourth, can work without interruption

The digital sensor has a fault error reporting function. When a fault occurs, it will output a signal to the meter. When the meter receives the signal, it can discard its value to automatically start the uninterrupted working mode, and still can guarantee a certain accuracy. The user can also know at any time. Which sensor needs

Replacement will not cause production stagnation.

5. Easy maintenance and low overall cost of use

The digital load cell is connected to the cable using a standard plug, which guarantees the degree of protection and is very convenient to replace the sensor or cable, and because of the digital output of its output, it is not affected by the cable length. Although the digital sensor has more boards than the analog sensor, it does not need to be calibrated during use, the debugging time is greatly reduced, the reliability is higher, and the self-diagnosis function is also provided. For some units that cannot be shut down, it can guarantee Uninterrupted work saves production costs, so in general, the overall cost of using it is lower than that of analog sensors.

Weighing sensor, weighing module, weight transmitter, weighing control instrument, weighing application system