Tank Dosing Process Weighing Control System Electronic Weighing Metering For non-professional users, it is very difficult to use the load cell directly. Various issues must be considered when installing. Guangzhou Nanchuang China "weighing control system" industry leader, weighing system experts! China imports the top ten suppliers of sensors, instrumentation and industrial spare parts; Tank dosing process Weighing control system is a new type of weighing component that combines load cell, load transfer device and mounting connector. It can be easily connected to various shapes of mechanical devices to form a weighing system. It is very convenient to connect with various shapes of mechanical devices to form a weighing system, such as connecting raceways, platforms, vertical tanks, bad tanks, hoppers, reactors, etc.

Tank weighing process weighing control system features:

1. Digital weight display;

2. High precision, high safety load cell with good stability of the installation module;

3. It can be applied to stock control management of raw materials such as liquids and powders;

4. According to the actual site status, use 3 or 4 sets of sensors;

5. Cooperate with the optional quantitative control system to achieve quantitative automatic feeding or quantitative automatic discharging;

6. There are general non-explosion-proof and explosion-proof specifications for purchase;

7. The weight signal of the weigh module installed at the ground of the tank is transmitted to the junction box. In the junction box, the angular difference can be adjusted according to the load condition of various weighing modules, and the collected weight signal is sent to the weighing end or the weight transmitter. The weighing terminal or weight signal is processed into corresponding weight data.

8. The module adopts a combination of floating and semi-floating. The weighing and measuring system formed by using the sensor can automatically measure the weighing data, store the computer and carry out weighing data management.

9. The system has fully automatic, automatic and manual functions. In either case, there is a mandatory function. This feature can immediately start or stop an operation to cope with some unexpected events, making the system more resilient. 10. Fully automatic: automatic way with computer monitoring and all data functions. (Optional) Tank dosing process In the automatic mode (including fully automatic), after receiving the instruction to request the ingredients, the alarm will ring, notify the site personnel to pay attention, and then start the transfer pump equipment in sequence, the system is connected. By stopping the batching command, the system discharges the thickest material in the weighing tank and stops.

The range control of the weighing control system of the tank batching process: feeding, weighing, and discharging.

1. Tank Dosing Process The weighing control system control will begin with the feed pump of the raw material until the compliant material is delivered to the tank. It will include all control, control and interlocking of the discharge valve, start and stop of each material feed pump, fast and slow feed control, status detection, and all data processing functions.

2. Tank batching process The weighing control system consists of a weighing unit, a data processing unit and a logic control unit. They work independently of each other and are closely linked in a question and answer manner. Flexibility and maneuverability, while improving the degree of automation of the system, it also improves the reliability of the system. To ensure that users can run long-term failures.